Easy to use scale LED lighting set, suitable for 30-60 size scale model helicopters and aeroplanes.

Two switches, one is for the operation of the lights and one is for the optional landing lights.

The device also can be used as a signal generator for electric speed controller (ESC), then you can test your motor system without using a transmitter and receiver.
* There are 3 modes to check servos or ESC:
◎Manual mode: turn the knob with different speed, check the reaction time.
◎Neutral mode: make the servo go back to the neutral point.
◎Automatic "window wiper" mode: make the servo swing like a window wipers in the biggest angle.
*It can connect 1-3 servos simultaneously and test such as 1-3 servos consistency and so on.
* You can also connect 1-3 ESC to test and compare their reaction time respectively.
* It can connect 3 servos of the CCPM helicopters and select servos.
* It can also connect the servo of airplanes install the steering-box and adjust planes by using such as the neutral mode and so on.

These screws are an idaal replacement for cow and canopy bolts in larger models.

Diameter: 4mm
Length (without handle): 15mm
Length (with handle): 25mm

These screws are an idaal replacement for cow and canopy bolts in larger models.

Diameter: 4mm
Length (without handle): 20mm
Length (with handle): 30mm

These screws are an idaal replacement for cow and canopy bolts in larger models.

Diameter: 4mm
Length (without handle): 15mm
Length (with handle): 25mm

This is a Xtra-Large, Non-Retractable Tailwheel Assembly for 22-32 Pound Aircraft from Ohio Superstar.

Take the guess work out of engine temperatures.  This temp gun is accurate to 2 degrees.  All engines need to run within manufacturers temperature specifications to get the best life and performance possible.  The temp gun works great whether it be a big gas engine, nitro or electric brushless motors.  Its also a great tool to watch your Lipo battery temperatures. This small investment could save you big bucks  on your RC engines.  The Pro Exotics PE-1 Infrared Temp Gun is a great basic unit retailing at $49 It is the most affordable Temp Gun, yet it maintains the same great accuracy and durability of our more expensive units. With a range of -27F to +428F (easily switchable to -33C to +220C) and MAX/MIN/LOCK modes, the PE-1 will meet the needs of 95% of users, professionals and hobbyists alike. The PE-1 unit comes preset with a default Emissivity setting of 95E. Whether shooting engine temperatures, food prep temperatures, or animal basking temperatures, the PE-1 is a terrific and reliable Temp Gun at an amazingly affordable price! (includes case & wrist strap)

Take the guess work out of engine temperatures.    All engines need to run within manufacturers temperature specifications to get the best life and performance possible. This small investment could save you big bucks  on your RC engines. The Pro Exotics PE-2 Infrared Temp Gun adds a few more advanced features than our PE-1, but retains a great retail price of just $69 The PE-2 unit adds a much requested red sighting laser, and an expanded temperature range to 662F (easily switchable to 350C). The PE-2 has an adjustable emissivity setting for precise calibration, and perhaps best of all, a tight infrared "cone" distance to spot ratio (D:S) of 6:1. That means at a distance of 6 inches, you are reading an area just 1 inch in diameter. At a distance of 2 feet, an area of just 4 inches, as compared to our wider D:S ratio of 1:1 on the PE-1 unit. Whether shooting engine temperatures, food prep temperatures, or animal basking temperatures, the PE-2 is a terrific and reliable Temp Gun .

These lights are suitable for helicopter and airplane.
Easy to install, the lights will change according to the position of your transmitter sticks.
8 color LED lights.
Input 4-6V.