You can also buy as a Combo Pack!!

The next level in 2013 giving a fresh all new ground up design with the RcFactory 39” EPP Edge 540 model. Those that are familiar with the previous 39” models will appreciate the new hardware and construction including rear tail control push rod assemblies with adjustablity and new epp bracing for easy assembly. While creating a new ground up airframe the duel aileron servos have now been re-located which creates a plush/clean look. The over all flight envelope has increased greatly giving a sense of unreal control authority and increased roll rate was also achieved with the addition of outer counter balance tabs. This model was designed for the pilot wanting to learn the “next step” and also those who choose a balsa 3d model alternative.

Expert series:
If you prefer bigger models with fully airfoiled wing, you can´t make a mistake with these. Developed by some of the best 3D pilots for a combination of 3D capability and easy, predictable handling

You can also buy as a Combo Pack!!

The next level in 2013 giving a fresh all new ground up design with the RcFactory 39” EPP Edge 540 model. Those that are familiar with the previous 39” models will appreciate the new hardware and construction including rear tail control push rod assemblies with adjustablity and new epp bracing for easy assembly. While creating a new ground up airframe the duel aileron servos have now been re-located which creates a plush/clean look. The over all flight envelope has increased greatly giving a sense of unreal control authority and increased roll rate was also achieved with the addition of outer counter balance tabs. This model was designed for the pilot wanting to learn the “next step” and also those who choose a balsa 3d model alternative.

Expert series:
If you prefer bigger models with fully airfoiled wing, you can´t make a mistake with these. Developed by some of the best 3D pilots for a combination of 3D capability and easy, predictable handling

You can also buy as a Combo Pack!!

The next level in 2013 giving a fresh all new ground up design with the RcFactory 39” EPP Extra 330 Aerobatics model. Those that are familiar with the previous 39” models will appreciate the new hardware and construction including rear tail control push rod assemblies with adjustablity and new epp bracing for easy assembly. While creating a new ground up airframe the duel aileron servos have now been re-located which creates a plush/clean look. The over all flight envelope has increased greatly giving a sense of unreal control authority and increased roll rate was also achieved with the addition of outer counter balance tabs. This model was designed for the pilot wanting to learn the “next step” and also those who choose a balsa 3d model alternative.

Expert series:
If you prefer bigger models with fully airfoiled wing, you can´t make a mistake with these. Developed by some of the best 3D pilots for a combination of 3D capability and easy, predictable handling

Puddle The Star

 Is an extremely aerobatic, fully EPP built seaplane model. It will let you enjoy two fun domains in the same time: water and air. Oversize controls and insane power to weight ratio makes the plane an extemely agile 3D and aerobatic performer. With dialed-down throws, on the other hand, this may be your first seaplane ever, with linear and predictable handling. Water starts and landings are easy and smooth with only throttle control. If you add some control mixing, namely rudder – differential thrust and elevator – flaperons, you will turn this plane into something you have not seen before!

You can also buy as a Combo Pack!!

Revo P3

Revo P3 is a super-acrobatic biplane inspired by an actual aircraft.With its size it expands the range of our "one meter" models.Not just the new wing profile, that we developed specifically for this model, contributes to its excellent flight characteristics, but also the overall layout and model geometry,which allows precise flying from basic acrobatics to aggressive 3D maneuvers.
What type of flying you choose depends entirely on you.
Low weight and a new model concept increases its durability.
Revo P3 model is manufactured by modern CNC technology with the most prepared parts,
so that the assembly is easy as possible for you.

You can also buy as a Combo Pack!!

Revo P3

Revo P3 is a super-acrobatic biplane inspired by an actual aircraft.With its size it expands the range of our "one meter" models.Not just the new wing profile, that we developed specifically for this model, contributes to its excellent flight characteristics, but also the overall layout and model geometry,which allows precise flying from basic acrobatics to aggressive 3D maneuvers.
What type of flying you choose depends entirely on you.
Low weight and a new model concept increases its durability.
Revo P3 model is manufactured by modern CNC technology with the most prepared parts,
so that the assembly is easy as possible for you.

You can also buy as a Combo Pack!!