Expert Series

Includes Crack Beaver and other planes with 1 meter wing span or greater

Items 1 to 10 of 16 total Page:
  1. 1
  2. 2
  3. Next
Show per page
View as: List  Grid  Sort by Set Ascending Direction
REVO P3 Red
$149.95

You can also buy as a Combo Pack!!


Revo P3


Revo P3 is a super-acrobatic biplane inspired by an actual aircraft.With its size it expands the range of our "one meter" models.Not just the new wing profile, that we developed specifically for this model, contributes to its excellent flight characteristics, but also the overall layout and model geometry,which allows precise flying from basic acrobatics to aggressive 3D maneuvers.
What type of flying you choose depends entirely on you.
Low weight and a new model concept increases its durability.
Revo P3 model is manufactured by modern CNC technology with the most prepared parts,
so that the assembly is easy as possible for you.

Learn More

Add to Wishlist | Add to Compare

REVO P3 Black
$149.95

You can also buy as a Combo Pack!!


Revo P3


Revo P3 is a super-acrobatic biplane inspired by an actual aircraft.With its size it expands the range of our "one meter" models.Not just the new wing profile, that we developed specifically for this model, contributes to its excellent flight characteristics, but also the overall layout and model geometry,which allows precise flying from basic acrobatics to aggressive 3D maneuvers.
What type of flying you choose depends entirely on you.
Low weight and a new model concept increases its durability.
Revo P3 model is manufactured by modern CNC technology with the most prepared parts,
so that the assembly is easy as possible for you.

Learn More

Add to Wishlist | Add to Compare

Extra 330 Aerobatics 1000mm Span"
$139.95

You can also buy as a Combo Pack!!


The next level in 2013 giving a fresh all new ground up design with the RcFactory 39” EPP Extra 330 Aerobatics model. Those that are familiar with the previous 39” models will appreciate the new hardware and construction including rear tail control push rod assemblies with adjustablity and new epp bracing for easy assembly. While creating a new ground up airframe the duel aileron servos have now been re-located which creates a plush/clean look. The over all flight envelope has increased greatly giving a sense of unreal control authority and increased roll rate was also achieved with the addition of outer counter balance tabs. This model was designed for the pilot wanting to learn the “next step” and also those who choose a balsa 3d model alternative.


 


Expert series:
If you prefer bigger models with fully airfoiled wing, you can´t make a mistake with these. Developed by some of the best 3D pilots for a combination of 3D capability and easy, predictable handling

Learn More

Add to Wishlist | Add to Compare

Edge 540T HotRed
$139.95
Out of stock

You can also buy as a Combo Pack!!


The next level in 2013 giving a fresh all new ground up design with the RcFactory 39” EPP Edge 540 model. Those that are familiar with the previous 39” models will appreciate the new hardware and construction including rear tail control push rod assemblies with adjustablity and new epp bracing for easy assembly. While creating a new ground up airframe the duel aileron servos have now been re-located which creates a plush/clean look. The over all flight envelope has increased greatly giving a sense of unreal control authority and increased roll rate was also achieved with the addition of outer counter balance tabs. This model was designed for the pilot wanting to learn the “next step” and also those who choose a balsa 3d model alternative.


Expert series:
If you prefer bigger models with fully airfoiled wing, you can´t make a mistake with these. Developed by some of the best 3D pilots for a combination of 3D capability and easy, predictable handling

Learn More

Add to Wishlist | Add to Compare

Edge 540T Cool Blue
$139.95

You can also buy as a Combo Pack!!


The next level in 2013 giving a fresh all new ground up design with the RcFactory 39” EPP Edge 540 model. Those that are familiar with the previous 39” models will appreciate the new hardware and construction including rear tail control push rod assemblies with adjustablity and new epp bracing for easy assembly. While creating a new ground up airframe the duel aileron servos have now been re-located which creates a plush/clean look. The over all flight envelope has increased greatly giving a sense of unreal control authority and increased roll rate was also achieved with the addition of outer counter balance tabs. This model was designed for the pilot wanting to learn the “next step” and also those who choose a balsa 3d model alternative.


Expert series:
If you prefer bigger models with fully airfoiled wing, you can´t make a mistake with these. Developed by some of the best 3D pilots for a combination of 3D capability and easy, predictable handling

Learn More

Add to Wishlist | Add to Compare

Crack Yak Big-HCG
$139.95
Out of stock

You can also buy as a Combo Pack!!


The 39" Crack Yak-55 is finally here... the long awaited bigger brother to our well known Crack Yak-55 model. New wing core with tapered tips is one of the new features creating a much larger flight envelope for strong wind capabilities. Other items include added T-Canalizer and new SFG placement for amazing KE stability at any alpha. This is a fresh new ground up re-design. Chris Jewett's original world renowned 32" Crack Yak-55 has been our go to foamie and it is now crafted into a larger size for an even more intense flight envelope.


Those that are familiar with the previous 39” models will appreciate the new hardware and construction methods with adjustable push rod assemblies EPP bracing techniques for easy assembly. While creating a new ground up airframe the duel aileron servos were re-located to create a plush/clean look. The over all flight envelope has increased greatly giving a sense of unreal control authority and increased roll rate was also achieved with the addition of outer counter balance tabs. This model was designed for the pilot wanting to learn the “next step” and also those who choose a balsa 3d model alternative.

Learn More

Add to Wishlist | Add to Compare

Crack Yak Big-Grey
$139.95
Out of stock

You can also buy as a Combo Pack!!


The 39" Crack Yak-55 is finally here... the long awaited bigger brother to our well known Crack Yak-55 model. New wing core with tapered tips is one of the new features creating a much larger flight envelope for strong wind capabilities. Other items include added T-Canalizer and new SFG placement for amazing KE stability at any alpha. This is a fresh new ground up re-design. Chris Jewett's original world renowned 32" Crack Yak-55 has been our go to foamie and it is now crafted into a larger size for an even more intense flight envelope.


Those that are familiar with the previous 39” models will appreciate the new hardware and construction methods with adjustable push rod assemblies EPP bracing techniques for easy assembly. While creating a new ground up airframe the duel aileron servos were re-located to create a plush/clean look. The over all flight envelope has increased greatly giving a sense of unreal control authority and increased roll rate was also achieved with the addition of outer counter balance tabs. This model was designed for the pilot wanting to learn the “next step” and also those who choose a balsa 3d model alternative.

Learn More

Add to Wishlist | Add to Compare

Crack TURBO Beaver
$129.95
Out of stock

You can also buy as a Combo Pack!!



The Crack Turbo Beaver represents the ultimate in RC fun!  Equally at home in bush style flying and extreme 3D, the Crack Turbo Beaver is also surprisingly precise and offers unparalleled durability.  The huge EPP tires easily roll over gravel, dirt, rocks, tall grass, and other airplanes.  The unique X-shaped fuselage design adds scale looks in the air as well as high stiffness with no need for additional carbon bracing, while the rolled cowl and canopy add to the scale outline and lend tremendous strength to the front of the aircraft.

Designed and developed by Twisted Hobbys team members Chris Jewett and Cody Wojcik, the Crack Turbo Beaver takes the extreme design philosophy that produced the renowned Crack Yak, Crack Pitts, and Crack Laser and gives the Crack treatment to the famous DeHavilland Turbo Beaver bush plane.  RCFactory adds their world-class manufacturing techniques and the highest quality EPP foam available.  The result is just about as much fun as you can have with an RC airplane!  Harriers, hovers, precise knife-edge, rolling harriers, flat spins, snap rolls, and other high-performance aerobatics compliment the traditional loops and barrel rolls you would expect from a high-wing plane.  The high wing placement means that the Crack Turbo Beaver is also very stable, and makes a great beginner's aircraft, or just lazily cruising around the back yard.  Of course, being nearly indestructible means you can fly between trees, spot-land on your picnic table, and try other crazy things that you'd never do with a balsa airplane.

Equipped with four 5-gram servos, a 2s-3s 350-650mah battery, and 19-26 gram motor, the Crack Turbo Beaver is exceptionally versatile and will fly well on a wide variety of equipment and CG placements.  Of course, Twisted Hobbys keeps everything simple as always with a proven plug-and-play power combo that provides great performance at a reasonable price.

Pair your Crack Turbo Beaver with any computerized 5+ channel radio and enable flaperons and spoilerons for even more fun and capability!  Near-vertical stalled descents with the spoilers up, low-speed scale flying with the flaps down, and super-tight loops with the flaps mixed to the elevator add even more depth to the CTB's repertoire.

Learn More

Add to Wishlist | Add to Compare

Items 1 to 10 of 16 total Page:
  1. 1
  2. 2
  3. Next
Show per page
View as: List  Grid  Sort by Set Ascending Direction
 

My Cart

You have no items in your shopping cart.