Shop by

Shopping Options

Category
  1. Plane Combo Deals (6)
 

Search results for 'edge 540'

Items 1 to 10 of 14 total Page:
  1. 1
  2. 2
  3. Next
Show per page
View as: List  Grid  Sort by Set Descending Direction
EDGE 540 EPP kit „Gary H.
$109.95



EDGE 540 EPP kit Gary H.


You can also buy as a Combo Pack!!


The new Edge 540 EPP range


are top and bottom printed 3D foamies with a 31.5"/800mm wingspan designed for 60-80W brushless motors and 3 servos.


Each RC Factory Edge 540 is produced entirely from EPP and has a target flying weight of 160-200g (5.64-7.05oz). The 31.5"/800m wing is not profiled. These models are designed to be built quickly and do not have an undercarriage although an undercarriage is available separately.

Learn More

Add to Wishlist | Add to Compare

EDGE 540 EPP kit Castrol
$109.95



EDGE 540 Castrol


You can also buy as a Combo Pack!!


The new Edge 540 EPP rangeare top and bottom printed 3D foamies with a 31.5"/800mm wingspan designed for 60-80W brushless motors and 3 servos.


Each RC Factory Edge 540 is produced entirely from EPP and has a target flying weight of 160-200g (5.64-7.05oz). The 31.5"/800m wing is not profiled. These models are designed to be built quickly and do not have an undercarriage although an undercarriage is available separately.

Learn More

Add to Wishlist | Add to Compare

EDGE 540 EPP kit Castrol Combo Pack
$229.95

EDGE 540 EPP kit Castrol.


The new Edge 540 EPP rangeare top and bottom printed 3D foamies with a 31.5"/800mm wingspan designed for 60-80W brushless motors and 3 servos.


Each RC Factory Edge 540 is produced entirely from EPP and has a target flying weight of 160-200g (5.64-7.05oz). The 31.5"/800m wing is not profiled. These models are designed to be built quickly and do not have an undercarriage although an undercarriage is available separately.

Learn More

Add to Wishlist | Add to Compare

EDGE 540 EPP kit Gary H Combo Pack
$229.95

EDGE 540 EPP kit „Gary H scheme.


The new Edge 540 EPP rangeare top and bottom printed 3D foamies with a 31.5"/800mm wingspan designed for 60-80W brushless motors and 3 servos.


Each RC Factory Edge 540 is produced entirely from EPP and has a target flying weight of 160-200g (5.64-7.05oz). The 31.5"/800m wing is not profiled. These models are designed to be built quickly and do not have an undercarriage although an undercarriage is available separately.

Learn More

Add to Wishlist | Add to Compare

Edge 540T Cool Blue
$139.95

You can also buy as a Combo Pack!!


The next level in 2013 giving a fresh all new ground up design with the RcFactory 39” EPP Edge 540 model. Those that are familiar with the previous 39” models will appreciate the new hardware and construction including rear tail control push rod assemblies with adjustablity and new epp bracing for easy assembly. While creating a new ground up airframe the duel aileron servos have now been re-located which creates a plush/clean look. The over all flight envelope has increased greatly giving a sense of unreal control authority and increased roll rate was also achieved with the addition of outer counter balance tabs. This model was designed for the pilot wanting to learn the “next step” and also those who choose a balsa 3d model alternative.


Expert series:
If you prefer bigger models with fully airfoiled wing, you can´t make a mistake with these. Developed by some of the best 3D pilots for a combination of 3D capability and easy, predictable handling

Learn More

Add to Wishlist | Add to Compare

Edge 540T HotRed
$139.95

You can also buy as a Combo Pack!!


The next level in 2013 giving a fresh all new ground up design with the RcFactory 39” EPP Edge 540 model. Those that are familiar with the previous 39” models will appreciate the new hardware and construction including rear tail control push rod assemblies with adjustablity and new epp bracing for easy assembly. While creating a new ground up airframe the duel aileron servos have now been re-located which creates a plush/clean look. The over all flight envelope has increased greatly giving a sense of unreal control authority and increased roll rate was also achieved with the addition of outer counter balance tabs. This model was designed for the pilot wanting to learn the “next step” and also those who choose a balsa 3d model alternative.


Expert series:
If you prefer bigger models with fully airfoiled wing, you can´t make a mistake with these. Developed by some of the best 3D pilots for a combination of 3D capability and easy, predictable handling

Learn More

Add to Wishlist | Add to Compare

Edge 540T Cool Blue Combo Pack
$289.95

The next level in 2013 giving a fresh all new ground up design with the RcFactory 39” EPP Edge 540 model. Those that are familiar with the previous 39” models will appreciate the new hardware and construction including rear tail control push rod assemblies with adjustablity and new epp bracing for easy assembly. While creating a new ground up airframe the duel aileron servos have now been re-located which creates a plush/clean look. The over all flight envelope has increased greatly giving a sense of unreal control authority and increased roll rate was also achieved with the addition of outer counter balance tabs. This model was designed for the pilot wanting to learn the “next step” and also those who choose a balsa 3d model alternative.


Expert series:
If you prefer bigger models with fully airfoiled wing, you can´t make a mistake with these. Developed by some of the best 3D pilots for a combination of 3D capability and easy, predictable handling


Combo pack includes


1X A2212-980KV 2-3S Brushless Motor


1X 30amp esc


1X APC 10x4.7 slow fly prop


4X Emax 12g/2.0kg. 10sec Mini Metal Gear Digital servo's



Save approximately 10% on overall price with the combo deal.


Note. (Batteries are not included)

Learn More

Add to Wishlist | Add to Compare

Edge 540T Hot Red Combo Pack
$289.95

The next level in 2013 giving a fresh all new ground up design with the RcFactory 39” EPP Edge 540 model. Those that are familiar with the previous 39” models will appreciate the new hardware and construction including rear tail control push rod assemblies with adjustablity and new epp bracing for easy assembly. While creating a new ground up airframe the duel aileron servos have now been re-located which creates a plush/clean look. The over all flight envelope has increased greatly giving a sense of unreal control authority and increased roll rate was also achieved with the addition of outer counter balance tabs. This model was designed for the pilot wanting to learn the “next step” and also those who choose a balsa 3d model alternative.


Expert series:
If you prefer bigger models with fully airfoiled wing, you can´t make a mistake with these. Developed by some of the best 3D pilots for a combination of 3D capability and easy, predictable handling

Learn More

Add to Wishlist | Add to Compare

Edge 540 MINI red
$99.95
Out of stock

The EPP Edge 540 Mini is the highest performance 3D and extreme aerobatic small EPP plane on the market! The Mini evolved out of our quest for a small super high-performance plane that could be flown literally anywhere, in any space, yet improve on the over the top performance of the original Edge Backyard. Through our extensive design and testing program over the last year we have honed in on the exact wing loading, power to weight ratio and developed the new airframe tweaks needed to excel in this smaller size. The result is going to be the most fun plane that you have ever had!


With the original Edge 540 Backyard I wanted to make a plane that wasn't your average floaty EPP 3D plane and really put together something that would be exciting to fly, precise, and very wild and crazy when you wanted it to be. In the design process for that plane we really learned a lot about what happens to airframe tweaks and designs when you scale them down reduce surface efficiency and increase wing loading while you do it. That "research" resulted in an airframe that maximized the effects of its wing loading and had airframe features that functioned extremely well in an inefficient flat plate small plane world - Chris Jewett



With the Mini we capitalized and exaggerated those design features to make a small plane that will really perform! From the special design motor/esc combo to the trailing edge variable vortex generators every effort was made to create a very high performance, very small pocket rocket!

Mini series:

Very agile backyard and indoor models - fully 3D capable pocket rockets! Recommended for experienced pilots.

Learn More

Add to Wishlist | Add to Compare

Edge 540 MINI yellow
$99.95

The EPP Edge 540 Mini is the highest performance 3D and extreme aerobatic small EPP plane on the market! The Mini evolved out of our quest for a small super high-performance plane that could be flown literally anywhere, in any space, yet improve on the over the top performance of the original Edge Backyard. Through our extensive design and testing program over the last year we have honed in on the exact wing loading, power to weight ratio and developed the new airframe tweaks needed to excel in this smaller size. The result is going to be the most fun plane that you have ever had!


With the original Edge 540 Backyard I wanted to make a plane that wasn't your average floaty EPP 3D plane and really put together something that would be exciting to fly, precise, and very wild and crazy when you wanted it to be. In the design process for that plane we really learned a lot about what happens to airframe tweaks and designs when you scale them down reduce surface efficiency and increase wing loading while you do it. That "research" resulted in an airframe that maximized the effects of its wing loading and had airframe features that functioned extremely well in an inefficient flat plate small plane world - Chris Jewett



With the Mini we capitalized and exaggerated those design features to make a small plane that will really perform! From the special design motor/esc combo to the trailing edge variable vortex generators every effort was made to create a very high performance, very small pocket rocket!

Mini series:

Very agile backyard and indoor models - fully 3D capable pocket rockets! Recommended for experienced pilots.

Learn More

Add to Wishlist | Add to Compare

Items 1 to 10 of 14 total Page:
  1. 1
  2. 2
  3. Next
Show per page
View as: List  Grid  Sort by Set Descending Direction
 

My Cart

You have no items in your shopping cart.