Shop by

Shopping Options

Category
  1. Plane Combo Deals (7)
 

Search results for 'oil'

Items 1 to 10 of 15 total Page:
  1. 1
  2. 2
  3. Next
Show per page
View as: List  Grid  Sort by Set Descending Direction
Crack TURBO Beaver
$129.95

You can also buy as a Combo Pack!!



The Crack Turbo Beaver represents the ultimate in RC fun!  Equally at home in bush style flying and extreme 3D, the Crack Turbo Beaver is also surprisingly precise and offers unparalleled durability.  The huge EPP tires easily roll over gravel, dirt, rocks, tall grass, and other airplanes.  The unique X-shaped fuselage design adds scale looks in the air as well as high stiffness with no need for additional carbon bracing, while the rolled cowl and canopy add to the scale outline and lend tremendous strength to the front of the aircraft.

Designed and developed by Twisted Hobbys team members Chris Jewett and Cody Wojcik, the Crack Turbo Beaver takes the extreme design philosophy that produced the renowned Crack Yak, Crack Pitts, and Crack Laser and gives the Crack treatment to the famous DeHavilland Turbo Beaver bush plane.  RCFactory adds their world-class manufacturing techniques and the highest quality EPP foam available.  The result is just about as much fun as you can have with an RC airplane!  Harriers, hovers, precise knife-edge, rolling harriers, flat spins, snap rolls, and other high-performance aerobatics compliment the traditional loops and barrel rolls you would expect from a high-wing plane.  The high wing placement means that the Crack Turbo Beaver is also very stable, and makes a great beginner's aircraft, or just lazily cruising around the back yard.  Of course, being nearly indestructible means you can fly between trees, spot-land on your picnic table, and try other crazy things that you'd never do with a balsa airplane.

Equipped with four 5-gram servos, a 2s-3s 350-650mah battery, and 19-26 gram motor, the Crack Turbo Beaver is exceptionally versatile and will fly well on a wide variety of equipment and CG placements.  Of course, Twisted Hobbys keeps everything simple as always with a proven plug-and-play power combo that provides great performance at a reasonable price.

Pair your Crack Turbo Beaver with any computerized 5+ channel radio and enable flaperons and spoilerons for even more fun and capability!  Near-vertical stalled descents with the spoilers up, low-speed scale flying with the flaps down, and super-tight loops with the flaps mixed to the elevator add even more depth to the CTB's repertoire.

Learn More

Add to Wishlist | Add to Compare

Crack TURBO Beaver Combo pack
$269.95

The Crack Turbo Beaver represents the ultimate in RC fun!  Equally at home in bush style flying and extreme 3D, the Crack Turbo Beaver is also surprisingly precise and offers unparalleled durability.  The huge EPP tires easily roll over gravel, dirt, rocks, tall grass, and other airplanes.  The unique X-shaped fuselage design adds scale looks in the air as well as high stiffness with no need for additional carbon bracing, while the rolled cowl and canopy add to the scale outline and lend tremendous strength to the front of the aircraft.

Learn More

Add to Wishlist | Add to Compare

Extra 330 Aerobatics 1000mm Span"
$139.95

You can also buy as a Combo Pack!!


The next level in 2013 giving a fresh all new ground up design with the RcFactory 39” EPP Extra 330 Aerobatics model. Those that are familiar with the previous 39” models will appreciate the new hardware and construction including rear tail control push rod assemblies with adjustablity and new epp bracing for easy assembly. While creating a new ground up airframe the duel aileron servos have now been re-located which creates a plush/clean look. The over all flight envelope has increased greatly giving a sense of unreal control authority and increased roll rate was also achieved with the addition of outer counter balance tabs. This model was designed for the pilot wanting to learn the “next step” and also those who choose a balsa 3d model alternative.


 


Expert series:
If you prefer bigger models with fully airfoiled wing, you can´t make a mistake with these. Developed by some of the best 3D pilots for a combination of 3D capability and easy, predictable handling

Learn More

Add to Wishlist | Add to Compare

Extra 330 Aerobatics 1000mm Span" Combo pack
$289.95

The next level in 2013 giving a fresh all new ground up design with the RcFactory 39” EPP Extra 330 Aerobatics model. Those that are familiar with the previous 39” models will appreciate the new hardware and construction including rear tail control push rod assemblies with adjustablity and new epp bracing for easy assembly. While creating a new ground up airframe the duel aileron servos have now been re-located which creates a plush/clean look. The over all flight envelope has increased greatly giving a sense of unreal control authority and increased roll rate was also achieved with the addition of outer counter balance tabs. This model was designed for the pilot wanting to learn the “next step” and also those who choose a balsa 3d model alternative.


Expert series:
If you prefer bigger models with fully airfoiled wing, you can´t make a mistake with these. Developed by some of the best 3D pilots for a combination of 3D capability and easy, predictable handling

Learn More

Add to Wishlist | Add to Compare

Edge 540T Cool Blue
$139.95

You can also buy as a Combo Pack!!


The next level in 2013 giving a fresh all new ground up design with the RcFactory 39” EPP Edge 540 model. Those that are familiar with the previous 39” models will appreciate the new hardware and construction including rear tail control push rod assemblies with adjustablity and new epp bracing for easy assembly. While creating a new ground up airframe the duel aileron servos have now been re-located which creates a plush/clean look. The over all flight envelope has increased greatly giving a sense of unreal control authority and increased roll rate was also achieved with the addition of outer counter balance tabs. This model was designed for the pilot wanting to learn the “next step” and also those who choose a balsa 3d model alternative.


Expert series:
If you prefer bigger models with fully airfoiled wing, you can´t make a mistake with these. Developed by some of the best 3D pilots for a combination of 3D capability and easy, predictable handling

Learn More

Add to Wishlist | Add to Compare

Edge 540T HotRed
$139.95

You can also buy as a Combo Pack!!


The next level in 2013 giving a fresh all new ground up design with the RcFactory 39” EPP Edge 540 model. Those that are familiar with the previous 39” models will appreciate the new hardware and construction including rear tail control push rod assemblies with adjustablity and new epp bracing for easy assembly. While creating a new ground up airframe the duel aileron servos have now been re-located which creates a plush/clean look. The over all flight envelope has increased greatly giving a sense of unreal control authority and increased roll rate was also achieved with the addition of outer counter balance tabs. This model was designed for the pilot wanting to learn the “next step” and also those who choose a balsa 3d model alternative.


Expert series:
If you prefer bigger models with fully airfoiled wing, you can´t make a mistake with these. Developed by some of the best 3D pilots for a combination of 3D capability and easy, predictable handling

Learn More

Add to Wishlist | Add to Compare

Edge 540T Cool Blue Combo Pack
$289.95

The next level in 2013 giving a fresh all new ground up design with the RcFactory 39” EPP Edge 540 model. Those that are familiar with the previous 39” models will appreciate the new hardware and construction including rear tail control push rod assemblies with adjustablity and new epp bracing for easy assembly. While creating a new ground up airframe the duel aileron servos have now been re-located which creates a plush/clean look. The over all flight envelope has increased greatly giving a sense of unreal control authority and increased roll rate was also achieved with the addition of outer counter balance tabs. This model was designed for the pilot wanting to learn the “next step” and also those who choose a balsa 3d model alternative.


Expert series:
If you prefer bigger models with fully airfoiled wing, you can´t make a mistake with these. Developed by some of the best 3D pilots for a combination of 3D capability and easy, predictable handling


Combo pack includes


1X A2212-980KV 2-3S Brushless Motor


1X 30amp esc


1X APC 10x4.7 slow fly prop


4X Emax 12g/2.0kg. 10sec Mini Metal Gear Digital servo's



Save approximately 10% on overall price with the combo deal.


Note. (Batteries are not included)

Learn More

Add to Wishlist | Add to Compare

Edge 540T Hot Red Combo Pack
$289.95

The next level in 2013 giving a fresh all new ground up design with the RcFactory 39” EPP Edge 540 model. Those that are familiar with the previous 39” models will appreciate the new hardware and construction including rear tail control push rod assemblies with adjustablity and new epp bracing for easy assembly. While creating a new ground up airframe the duel aileron servos have now been re-located which creates a plush/clean look. The over all flight envelope has increased greatly giving a sense of unreal control authority and increased roll rate was also achieved with the addition of outer counter balance tabs. This model was designed for the pilot wanting to learn the “next step” and also those who choose a balsa 3d model alternative.


Expert series:
If you prefer bigger models with fully airfoiled wing, you can´t make a mistake with these. Developed by some of the best 3D pilots for a combination of 3D capability and easy, predictable handling

Learn More

Add to Wishlist | Add to Compare

NEW...... Flash NG
$129.95



Flash NG - New Generation  


EPP MODEL FOR EXTREME AND 3D AEROBATICS


 Flash NG is a more compact, ground-up redesigned version of our highly popular classic 3D trainer. A model that can grow in step with your skills. We have chosen a slightly smaller size for easier transport, added aileron counterweights for better roll authority when you your skills grow to the point that you start to demand it. T-canalizer and SFGs were added for clean integrated and knife edge maneuvers. The wing is airfoiled for clean and precise flying. Carbon landing gear is included. This is a perfect plane for a fun lunch break in a nearby park!


 

Learn More

Add to Wishlist | Add to Compare

BIG Crack TURBO Beaver Apache
$199.95

You can also buy as a Combo Pack!!


Crack Turbo BIG Beaver "Apache"


Introducing the 43" EPP Crack Turbo Beaver, AKA The Big Breaver! The BIG Beaver represents the ultimate in RC fun in a BIG way!! Equally at home in bush style flying and extreme 3D, the Big Beaver is also surprisingly precise and offers unparalleled durability. The huge EPP tires easily roll over gravel, dirt, rocks, tall grass, and other airplanes. The unique X-shaped fuselage design adds scale looks in the air as well as extreme stiffness with no need for additional carbon bracing.


 

Learn More

Add to Wishlist | Add to Compare

Items 1 to 10 of 15 total Page:
  1. 1
  2. 2
  3. Next
Show per page
View as: List  Grid  Sort by Set Descending Direction
 

My Cart

You have no items in your shopping cart.