Type: A2212/13
No. Of cells:2-3 Li-Poly
RPM/V:1000 RMP/V
Max. efficiency:80%
Max. efficiency current:4-10A (>75%)
No load current / 10 V:0,5 A
Current capacity:12A/60 s
Internal Resistance: 90 mΩ
Dimensions:27.5x30 mm
Shaft diameter: 3.17 mm
Weight:47 g

This is a Bulk pack of 20 props

Save $5 and on postage

This is the GWS Reduction Series Propeller
Size: 8x4.3 in / 203x109 mm

This is the GWS Reduction Series Propeller
Size: 10 x 4.7 in / 254x119 mm

This is the GWS Reduction Series Propeller
Size: 11 x 4.7 in / 279x119 mm

This is the GWS Reduction Series Propeller
Size: 8x4.3 in / 203x109 mm

This is the GWS Reduction Series Propeller
Size: 9x4.7 in / 228x119 mm

●Auto detect the cells and type of batteries, and set the cutting-off voltage accordingly, 6V/9V for 2 and 3 cell lipo, and 0.8V/cell for Ni-Mh/NiCd batteries.
●Safe start, it will not start up when throttle at wrong position.
●Over-temperature protection: The ESC will stop working when surface temperature is over 90℃.
●Lose signal protection: The ESC will stop when lost control signal for over 1 second.
●Separate BEC unit, provide high current BEC output, yet maintain good reliability of the speed controller.

This motor on a APC 10X4.7 slow fly prop with a 20amp esc is ideal for the 39" 1000mm range of foamys with an 1000-1350 3c lipo.