Type: FLY-12A

· Weight: 7.1 g
· Size: 22 x18 x5 mm
· Constant Current: 12A
· Max Current: 15A (for ten seconds)
· FET: 6
· BEC: Yes,2A
· PWM: 8 KHz
· Input: 2 to 3 Li-Po

Enter short description

●Auto detect the cells and type of batteries, and set the cutting-off voltage accordingly, 6V/9V for 2 and 3 cell lipo, and 0.8V/cell for Ni-Mh/NiCd batteries.
●Safe start, it will not start up when throttle at wrong position.
●Over-temperature protection: The ESC will stop working when surface temperature is over 110℃.
●Lose signal protection: The ESC will stop when lost control signal for over 1 second.

●Auto detect the cells and type of batteries, and set the cutting-off voltage accordingly, 6V/9V for 2 and 3 cell lipo, and 0.8V/cell for Ni-Mh/NiCd batteries.
●Safe start, it will not start up when throttle at wrong position.
●Over-temperature protection: The ESC will stop working when surface temperature is over 110℃.
●Lose signal protection: The ESC will stop when lost control signal for over 1 second.

●Auto detect the cells and type of batteries, and set the cutting-off voltage accordingly, 6V/9V for 2 and 3 cell lipo, and 0.8V/cell for Ni-Mh/NiCd batteries.
●Safe start, it will not start up when throttle at wrong position.
●Over-temperature protection: The ESC will stop working when surface temperature is over 90℃.
●Lose signal protection: The ESC will stop when lost control signal for over 1 second.
●Separate BEC unit, provide high current BEC output, yet maintain good reliability of the speed controller.