Propellers
| Items 1 to 10 of 28 total | Page: | Show per page |
| View as: List Grid |
Sort by
|
APC 7x4 Slo-Flyer Propeller
This is a 7x4 Slo-Flyer "tractor" (not a "pusher") airplane propeller. This prop produces a lot of torque without a lot of speed.
FEATURES: Computer-optimized design gives these props a thinner profile and more "bite" with less noise. Lightweight molded nylon construction reduces rotating mass for higher output and longer life. Reinforcing carbon fibers help maintain true, constant pitch at any rpm. Slo-Flyer propellers work well with Electric powered Park Flyer-type aircraft.
Learn More
101mm/4 inch Aluminum Spinner
Diameter of the Spinner:Φ101mm /4 in
Hight: 105 mm / 4.13 in
Diameter of engine shaft nut(inner): Φ9mm
Weight: 175 g / 6.17 oz
Learn More
64mm/2.5in Aluminum Spinner
Diameter of the Spinner: Φ64mm /2.5 in
Hight: 64 mm / 2.5 in
Diameter of engine shaft nut(inner): Φ7mm (0.28 in)
Weight: 65 g / 2.3 oz (including the engine nut)
89mm/3.5in Aluminum Spinner
Diameter of the Spinner:Φ89mm /3.5 in
Hight: 93 mm / 3.67 in
Diameter of engine shaft nut(inner): Φ9mm (0.35 in)
Weight: 125 g / 4.4 oz (including the engine nut)
APC 8x3.8 Slo-Flyer Propeller
This is a 8x3.8 Slo-Flyer "tractor" (not a "pusher") airplane propeller. This prop produces a lot of torque even at low speeds.
FEATURES: Computer-optimized design gives these props a thinner profile and more "bite" with less noise. Lightweight molded nylon construction reduces rotating mass for higher output and longer life. Reinforcing carbon fibers help maintain true, constant pitch at any rpm. Slo-Flyer propellers work well with Electric powered Park Flyer-type aircraft.
Learn More
Bolly wooden prop 28X10 Limited stock
Regular Price: $90.00
Special Price: $45.00
JXF 12x4 inch Beechwood Propeller
●High efficiency & low noise
JXF propellers are made with special aerodynamic shape and careful selection of raw materials to maintain higher efficiency in working condition with low noise.
●Excellent static and dynamic balance
Each blade of JXF propeller is machined accurately in weight, blade angle, blade area, length and shape to maintain excellent static and dynamic balance and minimize the vibration in working condition.
●Safe and dependable
During the material selection, machining and quality check procedure, every JXF propeller must undertakes the static and dynamic test in tension and anti-deformation including the excess revolution test. Thus, every JXF propeller has a good rigidity and strength to ensure the safety in working condition.
●Accurate pitch and blade section
JXF propellers are made with ditital machines to maintain correct pitch and blade section. After machining, each propeller will be checked and hand worked again by experienced technicians to assure the best aerodynamic shape with greater thrust.
●Strictly selection of raw material with anti-deformation process
JXF propellers are made of imported red beech wood and some special hard plywood with special treatment for better strength, rigidity and minimum deformation.
| Items 1 to 10 of 28 total | Page: | Show per page |
| View as: List Grid |
Sort by
|
