Light weight but precise and reliable micro servos from BLUEARROW provide a chance for the development of micro in-door RC model planes and set the foundation for modern ultra light RC models research

Amplifier type: Analog Pulse Width / Audion Drive
Potentiomete Type: PT6
Potentiomete Resistance: 10K Ω
Motor Type: 5F Coreless Motor
Gear Material: POM(Polyformaldehyde)
Gear Series: 5
Gear Ratio: 1:400
Output gear diameter: Φ3.64 mm(Φ0.14 in)
Splined fixed set screw: 1.5mm*5 mm
Crust Material: Transparent PC
Crust Color: Gray
Splined Color: White
Splined Horns: 4 Class
Top Ball Bearing: NONE
Plug Specification: Mini JST
Connector Wire Length:130mm(5.12 in)
Connector Wire SPEC: 0.08mm*20
Servo Weight: 3.2g(0.11oz)
3.9g(0.14oz)(including wire)
Size: 19.7mm*8.4mm*22.7 mm
(0.78in*0.33in*0.89 in)

Amplifier type: Analog Pulse Width / Audion Drive
Potentiomete Type: PT6
Potentiomete Resistance: 10K Ω
Motor Type: 5F Coreless Motor
Gear Material: POM(Polyformaldehyde)
Gear Series: 5
Gear Ratio: 1:400
Output gear diameter: Φ3.64 mm(Φ0.14 in)
Splined fixed set screw: 1.5mm*5 mm
Crust Material: Transparent PC
Crust Color: Gray
Splined Color: White
Splined Horns: 4 Class
Top Ball Bearing: NONE
Plug Specification: JR
Connector Wire Length:130mm(5.12 in)
Connector Wire SPEC: 0.08mm*20
Servo Weight: 3.2g(0.11oz)
3.9g(0.14oz)(including wire)
Size: 19.7mm*8.4mm*22.7 mm
(0.78in*0.33in*0.89 in)

As early as 2004, BlueArrow has launched this ultra-micro servo (BA-TS-3.6) firstly in the
world, after several years of continuous improvement, this servo has a complete upgrade
both in accuracy and performance.
BlueArrow still provides you with such a ultra-micro servo with compact structure ,light
weight, high sensitivity and torque, be able to do effectively for variety of tasks.
Through its outstanding control circuit design and ultra-light material, its own weight only
3.6g,the output torque up to more than 0.3Kg, it is suitable for the application of the ultramicro
servo control system, and compose the control module with the system of
implementation and output.

Working voltage: 4.8-6.0v

Torque: 1.5/1.8Kg.cm 20.8/24.9oz.in (4.8V/6V)

Speed: 0.12/0.10sec/60°

Size: 32 x 11.5 x 24mm / 1.25 x 0.45 x 0.94 in
Weight: 8.5g / 0.29oz
Dead band width: 1-2 usec
Wire length: 23cm
connector type: Futaba/JR compatible

The device also can be used as a signal generator for electric speed controller (ESC), then you can test your motor system without using a transmitter and receiver.
* There are 3 modes to check servos or ESC:
◎Manual mode: turn the knob with different speed, check the reaction time.
◎Neutral mode: make the servo go back to the neutral point.
◎Automatic "window wiper" mode: make the servo swing like a window wipers in the biggest angle.
*It can connect 1-3 servos simultaneously and test such as 1-3 servos consistency and so on.
* You can also connect 1-3 ESC to test and compare their reaction time respectively.
* It can connect 3 servos of the CCPM helicopters and select servos.
* It can also connect the servo of airplanes install the steering-box and adjust planes by using such as the neutral mode and so on.

●Dimensions: 23.2 x 12.36 x 21.67mm
●Weight: 8g / 0.28 oz
●Operating Speed (4.8V no load): 0.12sec/60 degrees
●Stall Torque (4.8V): 2.2 kg/cm
●Temperature Range: -30 to +60 Degree C
●Connector lead length: 15cm
●Operating Voltage:4.8-6.0 Volts