wingspan 901mm - 1000mm

Items 1 to 10 of 11 total Page:
  1. 1
  2. 2
  3. Next
Show per page
View as: List  Grid  Sort by Set Descending Direction
Crack Yak Big-Grey
$179.00

You can also buy as a Combo Pack!!


The 39" Crack Yak-55 is finally here... the long awaited bigger brother to our well known Crack Yak-55 model. New wing core with tapered tips is one of the new features creating a much larger flight envelope for strong wind capabilities. Other items include added T-Canalizer and new SFG placement for amazing KE stability at any alpha. This is a fresh new ground up re-design. Chris Jewett's original world renowned 32" Crack Yak-55 has been our go to foamie and it is now crafted into a larger size for an even more intense flight envelope.


Those that are familiar with the previous 39” models will appreciate the new hardware and construction methods with adjustable push rod assemblies EPP bracing techniques for easy assembly. While creating a new ground up airframe the duel aileron servos were re-located to create a plush/clean look. The over all flight envelope has increased greatly giving a sense of unreal control authority and increased roll rate was also achieved with the addition of outer counter balance tabs. This model was designed for the pilot wanting to learn the “next step” and also those who choose a balsa 3d model alternative.

Learn More

Add to Wishlist | Add to Compare

Crack Yak Big-HCG
$179.00

You can also buy as a Combo Pack!!


The 39" Crack Yak-55 is finally here... the long awaited bigger brother to our well known Crack Yak-55 model. New wing core with tapered tips is one of the new features creating a much larger flight envelope for strong wind capabilities. Other items include added T-Canalizer and new SFG placement for amazing KE stability at any alpha. This is a fresh new ground up re-design. Chris Jewett's original world renowned 32" Crack Yak-55 has been our go to foamie and it is now crafted into a larger size for an even more intense flight envelope.


Those that are familiar with the previous 39” models will appreciate the new hardware and construction methods with adjustable push rod assemblies EPP bracing techniques for easy assembly. While creating a new ground up airframe the duel aileron servos were re-located to create a plush/clean look. The over all flight envelope has increased greatly giving a sense of unreal control authority and increased roll rate was also achieved with the addition of outer counter balance tabs. This model was designed for the pilot wanting to learn the “next step” and also those who choose a balsa 3d model alternative.

Learn More

Add to Wishlist | Add to Compare

Edge 540 V3 "NEW RELEASE !"
$194.00


This is a first model of a new line of 1M wingspan EPP models  with increased stiffnes and torsion ridgidity. We have beefed up everything, but especiallythe torsion ridgidity of the fuselage - so that fuselage twist in fast rolling manouvers is now totally a thing of the past. The wing is thicker too, for better tolerance of the most insane, high-G stunts.


This model can also take a bigger motor up to the 2217 size, although it already flies nicely with 2212 motors. If you prefer insane power in your 3D models, this one is the ticket !


Expert series:
If you prefer bigger models with fully airfoiled wing, you can´t make a mistake with these. Developed by some of the best 3D pilots for a combination of 3D capability and easy, predictable handling


manual

Learn More

Add to Wishlist | Add to Compare

Edge 540T Cool Blue
$179.00

You can also buy as a Combo Pack!!


The all new ground up design with the RcFactory 39” EPP Edge 540 model. Those that are familiar with the previous 39” models will appreciate the new hardware and construction including rear tail control push rod assemblies with adjustablity and new epp bracing for easy assembly. While creating a new ground up airframe the duel aileron servos have now been re-located which creates a plush/clean look. The over all flight envelope has increased greatly giving a sense of unreal control authority and increased roll rate was also achieved with the addition of outer counter balance tabs. This model was designed for the pilot wanting to learn the “next step” and also those who choose a balsa 3d model alternative.


Expert series:
If you prefer bigger models with fully airfoiled wing, you can´t make a mistake with these. Developed by some of the best 3D pilots for a combination of 3D capability and easy, predictable handling

Learn More

Add to Wishlist | Add to Compare

Edge 540T HotRed
$179.00

You can also buy as a Combo Pack!!


The fresh all new ground up design with the RcFactory 39” EPP Edge 540 model. Those that are familiar with the previous 39” models will appreciate the new hardware and construction including rear tail control push rod assemblies with adjustablity and new epp bracing for easy assembly. While creating a new ground up airframe the duel aileron servos have now been re-located which creates a plush/clean look. The over all flight envelope has increased greatly giving a sense of unreal control authority and increased roll rate was also achieved with the addition of outer counter balance tabs. This model was designed for the pilot wanting to learn the “next step” and also those who choose a balsa 3d model alternative.


Expert series:
If you prefer bigger models with fully airfoiled wing, you can´t make a mistake with these. Developed by some of the best 3D pilots for a combination of 3D capability and easy, predictable handling

Learn More

Add to Wishlist | Add to Compare

Flash Nebula
$179.00
Out of stock



Flash RELOADED


EPP MODEL FOR EXTREME 3D AEROBATICS


The Flash is an improvement of the original 3D trainer that used to be produced under the same name. although the main parameters remained the same,the model was totally re-engineered for easier straight forward build.


The model,which was originally designed as all around 3d trainer capable of anything you might ask from it was re-introduced after concentrated demand from our customers.


You will appreciate the forgiving characteristics and smooth linear response of this model - it will make your learning new 3D maneuvers a breeze.


 


 

Learn More

Add to Wishlist | Add to Compare

NEW" Puddle Star
$195.00
Out of stock



Puddle The Star


 Is an extremely aerobatic, fully EPP built seaplane model. It will let you enjoy two fun domains in the same time: water and air. Oversize controls and insane power to weight ratio makes the plane an extemely agile 3D and aerobatic performer. With dialed-down throws, on the other hand, this may be your first seaplane ever, with linear and predictable handling. Water starts and landings are easy and smooth with only throttle control. If you add some control mixing, namely rudder – differential thrust and elevator – flaperons, you will turn this plane into something you have not seen before!


 

Learn More

Add to Wishlist | Add to Compare

REVO P3 Black
$179.95

You can also buy as a Combo Pack!!


Revo P3


Revo P3 is a super-acrobatic biplane inspired by an actual aircraft.With its size it expands the range of our "one meter" models.Not just the new wing profile, that we developed specifically for this model, contributes to its excellent flight characteristics, but also the overall layout and model geometry,which allows precise flying from basic acrobatics to aggressive 3D maneuvers.
What type of flying you choose depends entirely on you.
Low weight and a new model concept increases its durability.
Revo P3 model is manufactured by modern CNC technology with the most prepared parts,
so that the assembly is easy as possible for you.

Learn More

Add to Wishlist | Add to Compare

REVO P3 Red
$179.95
Out of stock

You can also buy as a Combo Pack!!


Revo P3


Revo P3 is a super-acrobatic biplane inspired by an actual aircraft.With its size it expands the range of our "one meter" models.Not just the new wing profile, that we developed specifically for this model, contributes to its excellent flight characteristics, but also the overall layout and model geometry,which allows precise flying from basic acrobatics to aggressive 3D maneuvers.
What type of flying you choose depends entirely on you.
Low weight and a new model concept increases its durability.
Revo P3 model is manufactured by modern CNC technology with the most prepared parts,
so that the assembly is easy as possible for you.

Learn More

Add to Wishlist | Add to Compare

Revolto - Blue "NEW RELEASE"
$219.00


This Model was designed as a game changer in the 1M category.With huge ailerons with unprecedented throws (55 deg) and the full flying stab (with practically unlimited throws)will give yousuch control authority that you really can't ask for more ever!



  • Wingspan 1020 mm

  • length 1020 mm

  • weight up to 550g


RECOMENDED SET UP


  • servos 4x  10 to 15g

  • ESC 25A+

  • motor 2216 or bigger,2808

  • battery 3s (850-1500mAh) ,4s (650-1100 mAh)




 

Learn More

Add to Wishlist | Add to Compare

Items 1 to 10 of 11 total Page:
  1. 1
  2. 2
  3. Next
Show per page
View as: List  Grid  Sort by Set Descending Direction
 

My Cart

You have no items in your shopping cart.