wingspan 901mm - 1000mm

8 Item(s) Show per page
View as: List  Grid  Sort by Set Descending Direction
Crack Yak Big-Grey
$139.95

You can also buy as a Combo Pack!!


The 39" Crack Yak-55 is finally here... the long awaited bigger brother to our well known Crack Yak-55 model. New wing core with tapered tips is one of the new features creating a much larger flight envelope for strong wind capabilities. Other items include added T-Canalizer and new SFG placement for amazing KE stability at any alpha. This is a fresh new ground up re-design. Chris Jewett's original world renowned 32" Crack Yak-55 has been our go to foamie and it is now crafted into a larger size for an even more intense flight envelope.


Those that are familiar with the previous 39” models will appreciate the new hardware and construction methods with adjustable push rod assemblies EPP bracing techniques for easy assembly. While creating a new ground up airframe the duel aileron servos were re-located to create a plush/clean look. The over all flight envelope has increased greatly giving a sense of unreal control authority and increased roll rate was also achieved with the addition of outer counter balance tabs. This model was designed for the pilot wanting to learn the “next step” and also those who choose a balsa 3d model alternative.

Learn More

Add to Wishlist | Add to Compare

Crack Yak Big-HCG
$139.95
Out of stock

You can also buy as a Combo Pack!!


The 39" Crack Yak-55 is finally here... the long awaited bigger brother to our well known Crack Yak-55 model. New wing core with tapered tips is one of the new features creating a much larger flight envelope for strong wind capabilities. Other items include added T-Canalizer and new SFG placement for amazing KE stability at any alpha. This is a fresh new ground up re-design. Chris Jewett's original world renowned 32" Crack Yak-55 has been our go to foamie and it is now crafted into a larger size for an even more intense flight envelope.


Those that are familiar with the previous 39” models will appreciate the new hardware and construction methods with adjustable push rod assemblies EPP bracing techniques for easy assembly. While creating a new ground up airframe the duel aileron servos were re-located to create a plush/clean look. The over all flight envelope has increased greatly giving a sense of unreal control authority and increased roll rate was also achieved with the addition of outer counter balance tabs. This model was designed for the pilot wanting to learn the “next step” and also those who choose a balsa 3d model alternative.

Learn More

Add to Wishlist | Add to Compare

Edge 540T Cool Blue
$139.95

You can also buy as a Combo Pack!!


The next level in 2013 giving a fresh all new ground up design with the RcFactory 39” EPP Edge 540 model. Those that are familiar with the previous 39” models will appreciate the new hardware and construction including rear tail control push rod assemblies with adjustablity and new epp bracing for easy assembly. While creating a new ground up airframe the duel aileron servos have now been re-located which creates a plush/clean look. The over all flight envelope has increased greatly giving a sense of unreal control authority and increased roll rate was also achieved with the addition of outer counter balance tabs. This model was designed for the pilot wanting to learn the “next step” and also those who choose a balsa 3d model alternative.


Expert series:
If you prefer bigger models with fully airfoiled wing, you can´t make a mistake with these. Developed by some of the best 3D pilots for a combination of 3D capability and easy, predictable handling

Learn More

Add to Wishlist | Add to Compare

Edge 540T HotRed
$139.95

You can also buy as a Combo Pack!!


The next level in 2013 giving a fresh all new ground up design with the RcFactory 39” EPP Edge 540 model. Those that are familiar with the previous 39” models will appreciate the new hardware and construction including rear tail control push rod assemblies with adjustablity and new epp bracing for easy assembly. While creating a new ground up airframe the duel aileron servos have now been re-located which creates a plush/clean look. The over all flight envelope has increased greatly giving a sense of unreal control authority and increased roll rate was also achieved with the addition of outer counter balance tabs. This model was designed for the pilot wanting to learn the “next step” and also those who choose a balsa 3d model alternative.


Expert series:
If you prefer bigger models with fully airfoiled wing, you can´t make a mistake with these. Developed by some of the best 3D pilots for a combination of 3D capability and easy, predictable handling

Learn More

Add to Wishlist | Add to Compare

NEW" Puddle Star
$139.95



Puddle The Star


 Is an extremely aerobatic, fully EPP built seaplane model. It will let you enjoy two fun domains in the same time: water and air. Oversize controls and insane power to weight ratio makes the plane an extemely agile 3D and aerobatic performer. With dialed-down throws, on the other hand, this may be your first seaplane ever, with linear and predictable handling. Water starts and landings are easy and smooth with only throttle control. If you add some control mixing, namely rudder – differential thrust and elevator – flaperons, you will turn this plane into something you have not seen before!


 

Learn More

Add to Wishlist | Add to Compare

NEW...... Flash NG
$129.95



Flash NG - New Generation  


EPP MODEL FOR EXTREME AND 3D AEROBATICS


 Flash NG is a more compact, ground-up redesigned version of our highly popular classic 3D trainer. A model that can grow in step with your skills. We have chosen a slightly smaller size for easier transport, added aileron counterweights for better roll authority when you your skills grow to the point that you start to demand it. T-canalizer and SFGs were added for clean integrated and knife edge maneuvers. The wing is airfoiled for clean and precise flying. Carbon landing gear is included. This is a perfect plane for a fun lunch break in a nearby park!


 

Learn More

Add to Wishlist | Add to Compare

REVO P3 Black
$149.95

You can also buy as a Combo Pack!!


Revo P3


Revo P3 is a super-acrobatic biplane inspired by an actual aircraft.With its size it expands the range of our "one meter" models.Not just the new wing profile, that we developed specifically for this model, contributes to its excellent flight characteristics, but also the overall layout and model geometry,which allows precise flying from basic acrobatics to aggressive 3D maneuvers.
What type of flying you choose depends entirely on you.
Low weight and a new model concept increases its durability.
Revo P3 model is manufactured by modern CNC technology with the most prepared parts,
so that the assembly is easy as possible for you.

Learn More

Add to Wishlist | Add to Compare

REVO P3 Red
$149.95

You can also buy as a Combo Pack!!


Revo P3


Revo P3 is a super-acrobatic biplane inspired by an actual aircraft.With its size it expands the range of our "one meter" models.Not just the new wing profile, that we developed specifically for this model, contributes to its excellent flight characteristics, but also the overall layout and model geometry,which allows precise flying from basic acrobatics to aggressive 3D maneuvers.
What type of flying you choose depends entirely on you.
Low weight and a new model concept increases its durability.
Revo P3 model is manufactured by modern CNC technology with the most prepared parts,
so that the assembly is easy as possible for you.

Learn More

Add to Wishlist | Add to Compare

8 Item(s) Show per page
View as: List  Grid  Sort by Set Descending Direction