New series soldering technolog corrosion resistant tip.

Work voltage:12V
Rating power:30W

Description:

• This is a excellent Cordless Soldering Iron.


• It is ideal for that delicate job.


• Melting, softening; reshaping jobs that a standard blow torch would not be sufficiently or precise enough.


• The Pen Shape Solder Tool will melt both silver and gold solder.


• Materials such as small brazing rods, glass tubing, copper, tin, aluminium, etc.


• It is extremely easy to refill 


• Will hold just enough gas in its chamber to make sure you get the job done safely and fully finished.


• Soldering Iron Tool with blue pen shape, and two headers included.


• Gas Capacity: 8ml


• Temperature: 1300 degree, ironing temperature: 450 degree


• Material: hard plastic


• Size: 4 3/4 x 3/4 inch ( L*D)


• Weight: 77.4g

The device also can be used as a signal generator for electric speed controller (ESC), then you can test your motor system without using a transmitter and receiver.
* There are 3 modes to check servos or ESC:
◎Manual mode: turn the knob with different speed, check the reaction time.
◎Neutral mode: make the servo go back to the neutral point.
◎Automatic "window wiper" mode: make the servo swing like a window wipers in the biggest angle.
*It can connect 1-3 servos simultaneously and test such as 1-3 servos consistency and so on.
* You can also connect 1-3 ESC to test and compare their reaction time respectively.
* It can connect 3 servos of the CCPM helicopters and select servos.
* It can also connect the servo of airplanes install the steering-box and adjust planes by using such as the neutral mode and so on.

Heavy-duty woodworking construction with long tool life.

Ideal for lightening ply former etc

Rcexl ignitions are supplied as standard equipment on many RC engines and any repairs
or modifications may require the static timing point to be reset or checked
The kit will allow you to check and set your static timing point as specified,It comes with a
LED SHOW and audible (Buzzer) signals.
Rcexl ignition when checking over the magnet in the trigger point. Is to stop the
light-emitting LED and audible buzzer to stop the moment when the ignition spark.
This kit can also be used to check the correct operation of the hall sensor and determine
correct magnet orientation.

Product Information

Take the guess work out of engine temperatures.  This temp gun is accurate to 2 degrees.  All engines need to run within manufacturers temperature specifications to get the best life and performance possible.  The temp gun works great whether it be a big gas engine, nitro or electric brushless motors.  Its also a great tool to watch your Lipo battery temperatures. This small investment could save you big bucks  on your RC engines.  The Pro Exotics PE-1 Infrared Temp Gun is a great basic unit retailing at $49 It is the most affordable Temp Gun, yet it maintains the same great accuracy and durability of our more expensive units. With a range of -27F to +428F (easily switchable to -33C to +220C) and MAX/MIN/LOCK modes, the PE-1 will meet the needs of 95% of users, professionals and hobbyists alike. The PE-1 unit comes preset with a default Emissivity setting of 95E. Whether shooting engine temperatures, food prep temperatures, or animal basking temperatures, the PE-1 is a terrific and reliable Temp Gun at an amazingly affordable price! (includes case & wrist strap)

Take the guess work out of engine temperatures.    All engines need to run within manufacturers temperature specifications to get the best life and performance possible. This small investment could save you big bucks  on your RC engines. The Pro Exotics PE-2 Infrared Temp Gun adds a few more advanced features than our PE-1, but retains a great retail price of just $69 The PE-2 unit adds a much requested red sighting laser, and an expanded temperature range to 662F (easily switchable to 350C). The PE-2 has an adjustable emissivity setting for precise calibration, and perhaps best of all, a tight infrared "cone" distance to spot ratio (D:S) of 6:1. That means at a distance of 6 inches, you are reading an area just 1 inch in diameter. At a distance of 2 feet, an area of just 4 inches, as compared to our wider D:S ratio of 1:1 on the PE-1 unit. Whether shooting engine temperatures, food prep temperatures, or animal basking temperatures, the PE-2 is a terrific and reliable Temp Gun .

Prop Hub Drill Guides

CNC Machined

Made of Heated Steel

Cad Plated w/ Gold Irradiate

These hubs have been Heat Treated and have very precision holes. They will last a long time.

The hubs have been engraved and not stamped. The six lines that were also engraved on the face, help you keep track of which pattern you are drilling.

It comes with 2 bolts and washers to secure the hub to the prop for drilling.